Keyless Entry Transmitter Battery Removal and Installation
Keyless Entry Transmitter Battery: Service and Repair
Removal and Installation
Transmitter
REMOVAL
1. TRANSMITTER BATTERY
1. Disassemble the keyless transmitter, and take out the transmitter case (1).
2. Remove the claw, and open the transmitter case.
3. Remove the battery (1) from the transmitter.
NOTE: To prevent static electricity damage to the transmitter printed circuit board, touch the steel area of building with hand to discharge
static electricity carried on body or clothes before disassembling the transmitter.
INSTALLATION
1. TRANSMITTER BATTERY
Install in the reverse order of removal.