Outback F4-2.5L (2008)
INSTALLATION
Install in the reverse order of removal.
CAUTION: Be careful not to damage the sensor.
Tightening torque:
Sensor: 7.5 N-m (0.76 kgf-m, 5.5 ft-lb)
Bracket: 33 N-m (3.3 kgf-m, 24 ft-lb)
NOTE: Check the identification (mark) on the harness to make sure there is no warpage. (RH: K5 (White), LH: K6 (Yellow))
INSPECTION
ABS WHEEL SPEED SENSOR
