Outback F4-2.5L (2008)
4) Remove the air intake duct and air cleaner case.
5) Remove the air intake chamber.
6) Remove the pitching stopper.
7) Remove the hood stay holder (A) and radiator upper brackets (B).
8) Support the engine with a lifting device and wire ropes.
9) Lift up the vehicle.
CAUTION: When lifting up the vehicle, raise up wire ropes at the same time.
10) Remove the undercover.
11) Drain the engine oil.
12) Remove the front and center exhaust pipes.
13) Remove the nuts which install front cushion rubber onto front crossmember.
