Subaru Workshop Service and Repair Manuals

Fuel Level Sensor: Service and Repair
Fuel Level Sensor

Fuel Level Sensor

REMOVAL

WARNING:  Place "NO OPEN FLAMES" signs near the working area.

CAUTION:  Be careful not to spill fuel.

NOTE:  The fuel level sensor is built in fuel pump assembly.

1. Remove the fuel pump assembly.
2. Disconnect the connector from fuel pump bracket.
3. Remove the fuel level sensor and fuel temperature sensor.

INSTALLATION

Install in the reverse order of removal.

Tightening torque: 4.4 N.m (0.45 kgf.m, 3.2 ft.lb)