Outback F4-2.5L (2008)
Ignition Control Module: Testing and Inspection
Ignition Coil And Ignitor Assembly
INSPECTION
Check the secondary coil resistance using a tester. Replace if defective.
CAUTION:
-
If the resistance is extremely low, it indicates the presence of a short-circuit.
-
Ignitor is integrated with the coil. Therefore the resistance of primary side coil cannot be measured.
Specified resistance:
[Secondary side]
Between (A) and (B): 11.2 k ohms ± 15%
Between (C) and (D): 11.2 k ohms ± 15%
