Outback F4-2.5L (2008)
-
The removed front seat with airbag module must be kept at least 200 mm (8 in) away from walls and other objects.
-
When painting or performing sheet metal work on the front part of the vehicle, including the front wheel apron, front fender and front side frame,
remove the front sub sensors and wiring harness of airbag system.
-
When painting or performing sheet metal work on the side of the vehicle, including the side sill, center pillar and front and rear doors, remove the
side airbag sensors and wiring harness of the airbag system.
-
Do not discard undeployed airbag module. They could easily cause a serious accident if accidentally deployed.
-
When storing a removed airbag module, do not place it with the pad side facing downward. Do not place any objects on the airbag module. Do not
pile airbag modules on top of each other. If the airbag inflates for some reason when an airbag module pad is touching other objects, it may cause
serious accident.
