Outback F4-2.5L (2008)
16) Lower the transmission jack.
NOTE: Do not separate the transmission jack and transmission.
17) Remove the ATF inlet and outlet pipes.
CAUTION: When removing the outlet pipe, be careful not to lose the ball and spring used together with the retaining screw.
18) Remove the front vehicle speed sensor and torque converter turbine speed sensor.
19) Disconnect the connector from the rear vehicle speed sensor.
20) Remove the oil pan.
CAUTION: Be careful not to allow foreign matter such as dust or dirt to enter the oil pan.
21) Disconnect the control valve connector and transmission ground terminal.
