Outback F4-2.5L DOHC Turbo (2006)
1. Install the water pump onto cylinder block (LH).
NOTE:
^
Always use new gasket.
^
When installing the water pump, tighten the bolts in two stages in alphabetical sequence as shown in the figure.
2. Install the hose to water pump.
3. Install the belt cover No. 2 (LH).
4. Install the tensioner bracket.
5. Install the cam sprocket (LH) using ST.
6. Install the camshaft position sensor.
7. Install the belt idler No. 2 (C).
8. Install the belt idler (B).