Outback F4-2.5L DOHC Turbo (2006)
9. Install the automatic belt tension adjuster (A) which has a tension rod held by a pin.
10. Install the timing belt.
11. Install the V-belts.
12. Install the radiator.
13. Install the collector cover.
INSPECTION
1. Check the water pump bearing for smooth rotation.
2. Check the water pump pulley for abnormalities.
3. Make sure the impeller is not deformed or damaged.
4. Inspect the clearance between impeller and pump case.
5. After water pump installation, check the pulley shaft for engine coolant leaks and noise. If leaks or noise are noted, replace the water pump
assembly.
