Outback F4-2.5L DOHC Turbo (2006)
3) Draw end line (C) on ST using a marker at the same position as reference line (B) was drawn on the socket in step (2).
ST 499977100 / 499977400 CRANK PULLEY WRENCH
4) Use the ST to lock the crank pulley, and tighten the crank pulley bolt to the angle where reference line (A) and end line (C) are aligned.
ST 499977100 / 499977400 CRANK PULLEY WRENCH
NOTE:
It should be approx. 60° when reference line (A) and end line (C) are aligned.
5) Install the V-belts.
METHOD WITH ANGLE GAUGE
1) Clean the crankshaft thread using compressed air.
