Outback F4-2.5L DOHC Turbo (2006)
Drive Belt: Service and Repair
REMOVAL
NOTE: Perform the following procedures with the engine installed to the body.
FRONT SIDE BELT
1. Remove the collector cover.
2. Remove the V-belt covers.
3. Loosen the lock bolt (A).
4. Loosen the slider bolt (B).
5. Remove the front side belt (C).
REAR SIDE BELT
1. Loosen the lock nut (A).
2. Loosen the slider bolt (B).
3. Remove the A/C belt.
4. Remove the A/C belt tensioner.
INSTALLATION
