Outback F4-2.5L DOHC Turbo (2006)
![background image](/subaru/outback/f4-2.5l_dohc_turbo/Page-1793001.png)
Brake Light Switch: Testing and Inspection
Inspection
INSPECTION
1. If the stop light switch does not operate properly (or if it does not fix at the specified position), replace with a new one.
2. Measure the clearance between the threaded end of stop light switch and stopper.
CAUTION: Be careful not to rotate the stop light switch.
3. If it is not within the specified value, adjust it by adjusting the position of stop light switch.
CAUTION: Be careful not to rotate the stop light switch.