Outback F4-2.5L DOHC Turbo (2006)
Center Mounted Brake Lamp: Service and Repair
High-mounted Stop Light
REMOVAL
1. SEDAN MODEL
1. Disconnect the ground cable from battery.
2. Push the high-mounted stop light backward of the vehicle (1), raise the rear portion of it (2) and remove the clips to remove it.
3. Remove the harness from clamp.
4. Disengage two claws (A), pull out the high-mounted stop light from the cover and remove the claw (B).
5. Disengage three claws and remove the lens (A).
6. Remove the bulb.