Outback F4-2.5L DOHC Turbo (2006)
Fuel Return Line: Service and Repair
Fuel Delivery, Return and Evaporation Lines
REMOVAL
1. Set the vehicle on a lift.
2. Release the fuel pressure.
3. Open the fuel filler flap lid, and remove the fuel filler cap.
4. Remove the floor mat.
5. Disconnect the fuel delivery pipes and hoses, and then disconnect the fuel return pipes and hoses, evaporation pipes and hoses.
6. In the engine compartment, disconnect the fuel delivery hoses, return hoses, and evaporation hose.
1. Disconnect the quick connector of fuel delivery line and return line by pushing the ST in the direction of arrow.
ST 42099AE000 CONNECTOR REMOVER
2. Remove the clip, and disconnect the evaporation hose from pipe.
WARNING:
-
Be careful not to spill fuel.
-
Catch the fuel from hoses using a container or cloth.
7. Lift-up the vehicle.
8. Remove the fuel tank.
9. Separate the quick connector on fuel line.
