Outback F4-2.5L DOHC Turbo (2006)
15. Remove the transmission rear crossmember bolt.
16. Lower the transmission jack.
NOTE: Do not separate the transmission jack and transmission.
17. Remove the oil charge pipe.
18. Remove the ATF cooler inlet and outlet pipes.
NOTE: When removing the outlet pipe, be careful not to lose the ball and spring used with retaining screw.
19. Disconnect the connector from turbine speed sensor 1.
20. Remove the rear vehicle speed sensor.
21. Remove the oil pan.
22. Disconnect the control valve connector and front vehicle speed sensor connector.
