Outback F4-2.5L DOHC Turbo (2006)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature Sensor
REMOVAL
1. Remove the collector cover.
2. Disconnect the ground cable from battery.
3. Remove the generator.
4. Drain coolant.
5. Disconnect the connectors from engine coolant temperature sensor.
6. Remove the engine coolant temperature sensor.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 18 N.m (1.8 kgf-m, 13.3 ft-lb)