Outback F4-2.5L DOHC Turbo (2006)
Seat Occupant Sensor: Description and Operation
Occupant Detection System (From '06MY)
GENERAL
In '06MY, the occupant detection system was changed. The loadcell sensor that is located between the seat cushion and the seat frame consists of the
bladder (bag) containing silicon gel and the pressure sensor connected with a hose. When the passenger sits in the passenger's seat, the silicon gel
contained in the bladder is pushed. The loadcell sensor measures this pressure, and then it sends the signal to the occupant detection control module. The
occupant detection control module detects the physique of the person sitting in the passenger's seat based on the signals, and then it sends the control
signal to the airbag control module.
The belt tension sensor was also added to the outer seat belt. The belt tension sensor detects the status that seat belt is continuously tensioning (when the
child seat is attached to the passenger's seat, etc.), and then it sends the signal to the occupant detection control module.
