Outback F4-2.5L DOHC Turbo (2006)
^
FRONT CAMBER ADJUSTMENT
1. When adjusting the camber, adjust it to the following value.
2. Loosen the two self-locking nuts located at the front lower section of the strut.
NOTE: When the adjusting bolt needs to be loosened or tightened, hold its head with a wrench and turn the self-locking nut.
3. Turn the camber adjusting bolt so that the camber is set at specification.
NOTE: Moving the adjusting bolt by one scale changes the camber by approximately 0015'.
