Outback F4-2.5L DOHC Turbo (2006)
7. Remove the bolts which hold the power steering pump bracket.
8. Place the oil pump bracket in a vise, and remove the two bolts from the front side of oil pump.
CAUTION: When securing the oil pump bracket in a vise, hold the oil pump bracket with the least possible force between two wood Pieces.
9. Remove the bolt from the rear side of oil pump.
10. Disassemble the oil pump and bracket by inserting a flat tip screwdriver as shown in the figure.
H6 MODEL
1. Disconnect the ground cable from battery.
2. Remove the cover of pulley belt.
3. Remove the V-belt.
4. Remove the power steering pressure switch connector.
5. Remove the tensioner adjuster.
6. Disconnect the pressure hose and suction hose from the oil pump.
CAUTION:
