Outback F4-2.5L DOHC Turbo (2006)
16. Insert the ST from pinion housing side, and then remove the oil seal using a press.
ST 34199AE050 OIL SEAL REMOVER
17. Using a press, remove the bushing at gearbox installation portion.
CONTROL VALVE
1. Disconnect the pipes A and B from gearbox.
2. Secure the gearbox removed from the vehicle in vise using ST.
ST1 926200000 STAND
ST2 34199AG000 BOSS D
CAUTION: Secure the gearbox in a vise using ST as shown. Do not attempt to secure it without this ST.
