Outback F4-2.5L DOHC Turbo (2006)
Control Arm: Service and Repair
Front Suspension
Front Arm
REMOVAL
1. Lift-up the vehicle, and then remove the front wheels.
2. Remove the front crossmember support plate.
3. Remove the front stabilizer.
4. Remove the ball joint of front arm.
5. Remove the nut securing the front arm to crossmember. (Do not remove the bolt.)
6. Remove the front arm support plate.
7. Remove the bolt securing front arm to crossmember and pull the front arm out of the crossmember.
8. To remove the stud bolt, use the ST.
ST 20299AGO20 STUD BOLT SOCKET
CAUTION: Do not remove the stud bolt without necessity. Always replace the parts with new parts when removed.
