Outback F4-2.5L DOHC Turbo (2006)
CAUTION: Install the front link with the protrusion side faced to the front side of vehicle.
NOTE: Inspect the wheel alignment and adjust it if necessary.
Tightening torque: 120 Nm (12.2 kgf-cm, 89 ft. lbs.)
INSPECTION
Visually check the front link for damage and deformation.
Rear Link
Rear Link
REMOVAL
1. Lift-up the vehicle, and then remove the rear wheels.
2. Remove the rear stabilizer.
3. Using a transmission jack, support the rear arm horizontally.
4. Remove the bolts which secure the rear link to rear arm.
5. Put alignment marks on the rear link adjusting bolt and sub frame.
