Outback F4-2.5L DOHC Turbo (2006)
3. Select a weight close to the value measured by wheel balancer.
CAUTION: Use SUBARU genuine balance weight.
4. Install the selected weight to the point designated by wheel balancer.
CAUTION:
-
Remove grease from adhesive type weight applying surface of wheel.
-
Press the adhesive type weight by 25 N (2.5 kgs, 5.6 lbs.) or more per 5 g (0.18 oz) for 2 seconds at least to attain close contact.
-
Make all amounts of the applied adhesive type weight to be 100 g (3.53 oz) or less.
-
Make all amounts of the applied adhesive type weight of model with transmitter (tire pressure sensor) to be 120 g (4.23 oz) or less.
