Outback F4-2.5L DOHC Turbo (2006)
INSTALLATION
1. Check the control valve body for dust and other foreign matters.
2. Install the control valve body to transmission by equally tightening the bolts.
Tightening torque: 8 Nm (0.8 kgf-cm, 5.8 ft. lbs.)
3. Connect the control valve connector.
4. Attach the magnet at the specified position of oil pan.
5. Apply liquid gasket to the oil pan.
Liquid gasket: THREE BOND 1217B (Part No. K0877YA020)
6. Install the oil pan by equally tightening the bolts.
