subaru Workshop Repair Guides

Subaru Workshop Service and Repair Manuals

Clutch Pedal Position Sensor / Switch > < Construction|Page 4036
Page 6
background image

14. Push the release lever until the operating cylinder push rod retracts. Check whether the clutch fluid level in the reservoir tank increases or not.

15. If the clutch fluid level increases, hydraulic clutch play is correct.
16. If the clutch fluid level does not increase or push rod does not retract, readjust the clutch pedal.
17. Check the fluid level using the scale on the outside of the reservoir tank. If the level is below "MIN", fill fluid up to "MAX" level.

Recommended clutch fluid. FMVSS No. 116, fresh DOT3 or 4 brake fluid

Clutch Pedal Position Sensor / Switch > < Construction|Page 4036