Outback F4-2.5L DOHC Turbo (2006)
2. Tighten the four bolts to the back plate.
Tightening torque: 65 Nm (6.6 kgf-m, 47.9 ft. lbs.)
3. Remove the axle nut.
4. Draw the rear drive shaft into specified position.
5. Tighten the new axle nut temporarily.
CAUTION: Use a new axle nut (olive color).
6. Install the disc rotor to hub.
7. Install the disc brake caliper on the back plate.
Tightening torque: 53 Nm (5.4 kgf-m, 39.1 ft. lbs.)