Outback F4-2.5L DOHC Turbo (2006)
Wiper Arm: Service and Repair
Front
Front Wiper Arm
REMOVAL
CAUTION: When replacing wiper blades or etc., be sure to stand up the driver side wiper arm first, then passenger side wiper arm next. Also, when
putting the wiper arms back, be sure to start with passenger side first, then driver side next. Doing this in the reverse order may result in damage of
passenger side wiper arm by hitting with driver side wiper blade.
1. Open the hood.
2. Remove the cap.
3. Remove the nut to remove wiper arm.
INSTALLATION
1. Install in the reverse order of removal.
2. Operate the wiper once.
3. Align the wiper blade to ceramic print point mark (A) of front window panel.
Tightening torque:
T1: 6.0 N.m (0.61 kgf-m, 4.4 ft-lb)
T2: 20 N.m (2.0 kgf-m, 14.5 ft-lb)