Outback F4-2.5L SOHC (2005)
CAUTION:
-
Be careful not to damage the magnetic encoder.
-
Do not get closer the tool which charged magnetism to magnetic encoder.
2. Tighten the four bolts to the back plate.
Tightening torque: 65 Nm (6.6 kgf-cm, 47.9 ft. lbs.)
3. Remove the axle nut.
4. Draw the rear drive shaft into specified position.
5. Tighten the new axle nut temporarily.
CAUTION: Use a new axle nut (olive color).
6. Install the disc rotor on hub.
7. Install the disc brake caliper on back plate.
Tightening torque: 52 Nm (5.3 kgf-cm, 38.3 ft. lbs.)