Outback F4-2.5L SOHC (2005)
Manifold Pressure/Vacuum Sensor: Service and Repair
2.5L SOHC
Manifold Absolute Presure Sensor
REMOVAL
1. Disconnect the ground cable from battery.
2. Disconnect the connector from manifold absolute pressure sensor.
3. Remove the manifold absolute pressure sensor from throttle body.
INSTALLATION
Install in the reverse order of removal.
NOTE: Use new O-rings.
Tightening torque: 2 N.m (0.2 kgf-m, 1.5 ft-lb)