Outback F6-3.0L (2003)
Tightening torque: 32 Nm (3.3 kgf-cm, 24 ft. lbs.)
Tightening torque: 32 Nm (3.3 kgf-cm, 24 ft. lbs.)
4. Place a thickness gauge between ABS sensor's and tone wheel's tooth face. After standard clearance is obtained over the entire perimeter, tighten
ABS sensor on rear arm to specified torque.
ABS sensor standard clearance: 0.44 - 0.94 mm (0.0173 - 0.0370 inch)
Tightening torque: 32 Nm (3.3 kgf-cm, 24 ft. lbs.)
CAUTION: Check the marks on the harness to make sure that no distortion exists.
NOTE: If the clearance is outside specifications, adjust the gap using spacer (Part No. 26755AA000).
