Outback F6-3.0L DOHC (2006)
9. Remove the cable from trunk lid lock assembly.
Wagon model
1. Remove the rear seat.
2. Remove the center pillar lower trim, side sill cover, rear pillar lower trim and floor mat on the driver's side. Remove the clip holding cable.
3. Remove the bolt and nut, and then detach the pull handle assembly.
4. Remove the cable from pull handle assembly.
5. Remove the rear quarter trim RH.
6. Rotate the fuel lock inside of the quarter panel to 90 degrees and remove. (Either right or left turn)
INSTALLATION
Install in the reverse order of removal.
