Outback F6-3.0L DOHC (2006)
Air Bag(s) Arming and Disarming: Service and Repair
CAUTION
-
When servicing a vehicle, be sure to turn the ignition switch to OFF, disconnect the ground cable from battery, and wait for more than 20 seconds
before starting work.
-
The airbag system is fitted with a backup power source. If the airbag system is serviced within 20 seconds after the ground cable is disconnected,
it may inflate.
-
If the airbag warning light illuminates, repair the vehicle immediately. Airbag or pretensioner may inflate incorrectly, or not inflate in collision.
-
If sensors, airbag module, airbag control module, pretensioner and harness are deformed or damaged, replace them with new parts.
-
When checking the airbag system, be sure to use a digital circuit tester. Use of an analog circuit tester may cause the airbag to activate erroneously.
