Outback F6-3.0L DOHC (2006)
2. Insert the clamp upward to fix brake hose.
3. Install the brake hose to rear brake caliper using a new gasket.
4. Tighten the flare nut to specified torque.
Tightening torque (Brake pipe flare nut): 15 Nm (1.5 kgf-m, 10.8 ft. lbs.)
5. Bleed air from the brake system.
INSPECTION
Ensure there are no cracks, breakage or damage on hoses. Check joints for fluid leakage. If any cracks, breakage, damage or fluid leakage is found,
repair or replace the hose.
