Outback F6-3.0L DOHC (2006)
INSTALLATION
1. Check and adjust the operating rod of brake booster.
Standard L: 136.3 mm (5.38 inch)
If it is not within the specified value, adjust it by adjusting the brake booster operating rod.
2. Mount the brake booster in position.
3. Connect the operating rod to brake pedal with clevis pin and snap pin.
NOTE: Apply a thin coat of grease [SUNLIGHT 2 (Part No. 003602010)] to clevis pin.
4. Connect the vacuum hose to brake booster.
