Outback F6-30L DOHC (2006) | Front ABS Sensor Service and Repair (Page 4487)
Wheel Speed Sensor: Service and Repair
Rear ABS Sensor
Rear ABS Wheel Speed Sensor
REMOVAL
1. Disconnect the ground cable from battery.
2. Disconnect the connector from the rear ABS wheel speed sensor.
3. Remove the sensor harness bracket from the rear arm.
4. Remove the rear ABS wheel speed sensor from the rear arm.
CAUTION:
^
Be careful not to damage the sensor.
^
Do not apply excessive force to the sensor harness.