Outback F6-3.0L DOHC (2006)
NOTE:
All drained and flushed coolant should be recycled or disposed of in accordance with applicable Federal/State/Local/Environmental Protection
regulations.
1)
Drain Engine Coolant
^
Remove the Radiator Cap and Reservoir Tank. (Use extreme caution when removing the radiator cap.)
^
Raise the vehicle.
^
Remove the engine under cover.
^
Remove the drain plug to drain the engine coolant.
NOTE:
While coolant is draining, wash out the reservoir tank. Fill the tank about 1/3 of the way with water and shake vigorously. If needed, use a soap
solution to ensure all sediment is removed.
^
When coolant is fully drained, reinstall the drain plug in the radiator.
