Outback F6-3.0L DOHC (2006)
Radiator: Testing and Inspection
INSPECTION
1. Remove the radiator cap, top off the radiator with coolant, and then attach the tester in place of cap.
2. Apply a pressure of 157 kPa (1.6 kg/cm2, 23 psi) to the radiator to check if:
^
Engine coolant leaks at/around radiator.
^
Engine coolant leaks at/around hoses or connections.
CAUTION:
^
Engine should be turned off.
^
Wipe engine coolant from check points in advance.
^
Be careful to prevent engine coolant from spurting out when removing tester.
^
Be careful not to deform the filler neck of radiator when installing or removing the tester.
