Outback F6-3.0L DOHC (2006)
NOTE: When the water pump cannot be removed easier, screw-in the bolts (A) to screw part to remove water pump.
INSTALLATION
1. Install the water pump to rear chain cover.
NOTE: Apply engine coolant to O-ring.
Tightening torque 6.4 Nm (0.65 kgf-m, 4.7 ft. lbs.)
NOTE:
^
Use new O-rings.
^
Apply engine coolant to O-ring to install water pump easier.
2. Install the timing chain assembly.
3. Install the front chain cover.
4. Install the V-belts.
5. Install the radiator.
6. Fill with engine coolant.
INSPECTION
1. Check the water pump bearing for smooth rotation.
2. Check the water pump sprocket for abnormalities.
