Outback F6-3.0L DOHC (2006)
REMOVAL
1. Remove the crank pulley.
2. Remove the front chain cover.
3. Remove the timing chain assembly.
4. Remove the cam sprocket.
5. Remove the crank sprocket.
6. Remove the rear chain cover.
7. Disconnect the oil pipe.
8. Remove the rocker cover (LH).
9. Remove the plugs (LH).
10. Loosen the camshaft cap bolts equally, a little at a time in alphabetical sequence shown in the figure.
11. Remove the camshaft caps and camshaft (LH).
NOTE: Arrange camshaft caps in order so that they can be installed in their original positions.