Outback F6-3.0L DOHC (2006)
4. Align the intake cam sprocket as shown in the figure.
5. Turn the crank sprocket clockwise, align the "Top mark" to 12 o'clock position (Piston #1 is in TDC position)
NOTE: Do not rotate the crank shaft and cam sprocket until the timing chain installing was completed.
6. Install the idler sprocket (lower).
7. Install the timing chain (LH).
1
Align the timing mark (B) on the crank sprocket with mark (A) on the timing chain (LH).
