Outback F6-3.0L DOHC (2006)
6. Remove the front oxygen (A/F) sensor.
CAUTION: When removing the front oxygen (A/F) sensor, wait until exhaust pipe cools, otherwise it will damage the exhaust pipe.
INSTALLATION
1. Before installing front oxygen (A/F) sensor, apply anti-seize compound only to the threaded portion of front oxygen (A/F) sensor to make the next
removal easier.
Anti-seize compound: SS-30 JET LUBE
CAUTION: Never apply anti-seize compound to the protector of front oxygen (A/F) sensor.
2. Install the front oxygen (A/F) sensor.
