Outback F6-3.0L DOHC (2006)
Air Filter Element: Service and Repair
Air Cleaner Element
REMOVAL
1. Disconnect the ground cable from battery.
2. Disconnect the connector from mass air flow and intake air temperature sensor.
3. Remove the clip (A) from the upper side of air cleaner case.
4. Pull the air cleaner case (rear) to the rearward of vehicle, and then remove the air cleaner element.
NOTE: Be careful that the power steering hose is secured to the under side of air cleaner case (rear).
INSTALLATION
Install in the reverse order of removal.