Outback F6-3.0L DOHC (2006)
9. Remove the front vehicle speed sensor securing bolt.
10. Remove the front vehicle speed sensor through the hole of the AT transmission main case.
INSTALLATION
1. Install the front vehicle speed sensor.
Tightening torque: 7 Nm (0.7 kgf-cm, 5.2 ft. lbs.)
2. Connect the front vehicle speed sensor connector.
3. Apply proper amount of liquid gasket to the entire oil pan mating surface.
Liquid gasket: THREE BOND 1217B (Part No. K0877YA020)
4. Install the oil pan by equally tightening the bolts.
Tightening torque: 5 Nm (0.5 kgf-cm, 3.7 ft. lbs.)
5. Install the center differential carrier.