Outback F6-3.0L DOHC (2006)
Impact Sensor: Testing and Inspection
Impact Sensor Setting Using Subaru Select Monitor
IMPACT SENSOR SETTING USING SUBARU SELECT MONITOR
OPERATION
1. Connect the Subaru Select Monitor to data link connector.
2. Turn the ignition switch to ON.
3. Select {Body Integrated Unit} from the main menu.
4. Select {ECM customizing}.
5. Make a impact monitor setting.
-
When installing: ON
-
When removing: OFF
6. Make a impact monitor ON/OFF setting.
-
When installing: ON
-
When removing: OFF
7. Turn the ignition switch to OFF, and then remove the Subaru Select Monitor.
