Outback F6-3.0L DOHC (2006)
Seat Occupant Sensor: Initial Inspection and Diagnostic Overview
Inspection Mode
Inspection Mode
PROCEDURE
Recreate the circumstance by referring to the conditions described in the checklist.
CAUTION:
-
If any damage is observed for vehicle appearance, repair or replace before performing inspection mode.
-
If the airbag has been deployed, repair or replace before performing inspection mode.
Initial Inspection
INSPECTION
Before performing diagnosis, check the following items which might affect the occupant detection system problems.
1. BATTERY
Measure the battery voltage and specific gravity of electrolyte, and check the electrolyte amount.
Standard voltage: 12 V, or more
Specific gravity: 1.260 or more
Electrolyte: Between the upper level and lower level
2. AIRBAG SYSTEM
Read the DTC of airbag system, and check that there is no malfunction in airbag system.
Standard: DTC is not displayed.
