Outback F6-3.0L DOHC (2006)
Side Air Bag: Service and Repair
Side Airbag Module
REMOVAL
CAUTION: Refer to "CAUTION" of General Description before handling the airbag module.
NOTE: Remove the passenger's side by referring to driver's side.
1. Turn the ignition switch to OFF.
2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
3. Remove the front seats.
4. Remove the clip from reverse side of seat cushion assembly and slide rail IN (A), and then remove the side airbag harness.
5. Remove the backrest cover.
6. Remove the side airbag harness from backrest frame assembly.
7. Remove the side airbag module (A) from backrest frame assembly.