Outback F6-3.0L DOHC (2006)
^
Check the parking lock operation when the select lever is in "P" range.
9)
Install Inhibitor Switch Cover using 4 flange bolts.
TORQUE SPECIFICATIONS
INSTALLATION INSTRUCTIONS FOR SPLASH FIN
1)
Remove the black plug from right side of the floor pan to gain access to the threaded hole.
2)
Install splash fin using flange bolt, make sure fin runs parallel with frame rail, torque bolt to 140 +/- 20 Nm (14.2 +/- 2.0 kgf-m, 103 +/- 14.7 ft-lb)
WARRANTY INFORMATION
