Outback F6-3.0L DOHC (2006)
-
Do not drop each airbag module, airbag control module and each sensor, subject them to high temperature over 93 degree C (199 degree F), or
let water, oil or grease get on them; the internal parts may be damaged and reliability greatly lowered.
-
If any damage, opening or rust is found on the airbag system wire harness, do not attempt to repair using soldering equipment. Be sure to replace
the faulty harness with a new genuine part.
-
Install the wire harness securely with the specified clips to avoid interference or tangled up with other parts.
