Outback F6-3.0L DOHC (2006)
Lateral Acceleration Sensor: Service and Repair
Lateral G Sensor
REMOVAL
1. Remove the console box.
2. Disconnect the connector from lateral G sensor.
3. Remove the lateral G sensor.
INSTALLATION
Install in the reverse order of removal.
Tightening torque:
T1: 7.5Nm (0.76 kgf-cm, 5.5 ft. lbs.)
T2: 18 Nm (1.8 kgf-cm, 13.3 ft. lbs.)
