Outback F6-3.0L DOHC (2006)
2. Install the release bearing and fasten it with two clips.
3. Install the dust cover.
4. Check the bearing for smooth movement by operating the release lever.
5. Install the transmission assembly.
INSPECTION
1. RELEASE BEARING
NOTE: Since this bearing is grease-sealed and is a non-lubrication type, do not wash with gasoline or any other solvent when servicing the clutch.
1. Check the bearing for smooth movement by applying force to the bearing in the radial direction.
Radial direction stroke: 1.6 mm (0.063 inch)
2. While applying force to the bearing in the rotational direction, check the bearing for smooth rotation.